Connection To The Water Inlet - Miele CVA 5065 User Manual

Connection to the water inlet

Before making plumbing
connections, ensure the appliance is
disconnected from the mains
electricity supply.
^ Switch off at the main switch.
Connection to the water supply should
be carried out by a qualified plumber
and should incorporate a stopcock with
a 3/4" thread. The stopcock should be
fitted by a qualified plumber.
^ Connect the stainless steel hose to
the stopcock.
Use the hose supplied with the
machine. Old or used hoses must
not be connected to this coffee
machine.
^ Ensure that it is screwed into position
correctly.
Plumbed in water supply
The connection point is subject to
mains water pressure. Turn on the
stopcock slowly and check for leaks.
Correct the position of the seal and
union if necessary.
The protective sleeve of the hose
must not be damaged or kinked.
The water inlet hose must not be
shortened or damaged in any way.
73