Miele CVA 5065 User Manual page 67

. . . the descaling programme was
started by mistake.
The descaling programme cannot be
cancelled once you have touched the
OK sensor. The programme has to be
completed through to the end. This is a
safety measure to ensure that the
machine is fully descaled, and is
important for the long-term protection of
the machine and to ensure it functions
correctly.
^ Descale the machine (see "Descaling
the machine").
. . . the coffee machine makes loud
noises during the descaling
programme.
During the descaling programme you
will hear loud noises as water is flushed
through the machine under high
pressure. These are no cause for
concern.
. . . the heating-up time is getting
longer, the amount of water coming
through is incorrect and the machine
is not performing properly.
The machine needs descaling.
^ Descale the machine (see "Descaling
the machine").
. . . no water comes out of the central
spout.
The filters in the brew unit are dirty.
^ Remove the brew unit and clean the
filters with your finger (see "Cleaning
and care - Brew unit").
Problem solving guide
. . . the brew unit or the waste
container cannot be pulled out of the
machine.
The brew unit is not in the correct
position. This can happen if, for
example, the machine door is opened
during grinding or brewing.
^ Close the door. The brew unit will
position itself correctly automatically.
. . . the crema is not as it should be.
^ Check that the grinder setting is not
too coarse or too fine, and adjust
accordingly (see "Setting the coffee
grinder").
^ Check the temperatures the different
types of coffee have been set to. If
the temperature is too high, there will
be dark patches in the crema.
Reduce the temperature (see
"Settings: customising your machine -
Setting the temperature").
The crema will not form correctly if stale
coffee or an unsuitable coffee blend is
used or if the central spout is set too
high.
67