Miele CVA 6405 Operating Instructions Manual
Built-in
Hide thumbs
Also See for CVA 6405:
- Quick start manual (2 pages) ,
- Operating and installation instructions (88 pages)
Table of Contents
Related Manuals for Miele CVA 6405
Summary of Contents for Miele CVA 6405
- Page 1 Operating and installation instructions Built-in coffee machine To avoid the risk of accidents or damage to the machine, it is essential to read these instructions before it is installed and used for the first time. en - GB M.-Nr. 09 618 391...
-
Page 2: Caring For The Environment
Caring for the environment Disposal of the packing Disposal of your old machine material Electrical and electronic machines often contain valuable materials. They The packaging is designed to protect also contain materials which, if handled the appliance from damage during or disposed of incorrectly, could be transportation. -
Page 3: Table Of Contents
Contents Caring for the environment ......... . 2 Guide to the machine . - Page 4 Contents Setting up profiles ..........38 Calling up a profile.
- Page 5 Contents Cleaning and care ..........49 Quick guide .
-
Page 6: Guide To The Machine
Guide to the machine Exterior view a On/Off sensor K b Controls and display c Handle d Hot water spout e Drip tray cover f Height-adjustable central spout with lighting g Milk flask and lid... - Page 7 Guide to the machine Interior view h Ground coffee chute cover i Brew unit j Ground coffee chute k Slide control to select fineness of ground coffee l Coffee bean container m Water container with inlet device n Drip tray with grid o Waste container p Drip catcher q Central spout connector...
-
Page 8: Guide To The Machine
Guide to the machine Display and controls a On/Off sensor K For switching the coffee machine on and off b Drinks sensors For dispensing . Espresso / Coffee H Cappuccino k Latte macchiato c Further programmes x Other drinks such as Long coffee, Caffè latte, hot milk, milk froth and hot water Maintenance menu d Display... -
Page 9: Accessories
– Central spout connector cap – Angled connector for milk pipework Replacement part These products and other useful accessories can be ordered via the internet, from Miele (see back cover for contact details) or from your Miele dealer. -
Page 10: Warning And Safety Instructions
They contain important notes on installation, safety, use and maintenance. Miele cannot be held liable for damage caused by non- compliance with these instructions. Keep these instructions in a safe place and pass them on to any... - Page 11 Warning and Safety instructions Correct application This coffee machine is intended for use in domestic households and similar working and residential environments. Examples of a working or residential environment include – shops, offices and other working environments, – small businesses, showrooms etc., –...
- Page 12 Warning and Safety instructions Safety with children There is a danger of burning and scalding from the coffee and hot water dispensing spouts. Children's skin is far more sensitive to high temperatures than that of adults. Ensure children do not touch hot surfaces of the coffee machine or place any part of their body under the dispensing spouts.
- Page 13 Warning and Safety instructions Technical safety Installation and repairs may only be carried out by a Miele authorised service technician. Installation, repairs and other work by unqualified persons can cause considerable danger to users. A damaged coffee machine could be dangerous. Before building in the machine, check it for any externally visible damage.
- Page 14 Faulty components must only be replaced by genuine Miele Original spare parts. The manufacturer can only guarantee the safety of the machine when Miele replacement parts are used. The machine must be disconnected from the electricity supply during repair work.
- Page 15 Warning and Safety instructions Plumbed in water connection Do not connect the coffee machine to a hot water supply. The stopcock must be easily accessible after the coffee machine has been built in. The protective sleeve of the water inlet hose must not be damaged or become kinked.
- Page 16 Warning and Safety instructions Correct use The central spout and hot water spout present a danger of burning or scalding. The liquids and steam dispensed are very hot. Water in the drip tray can also be very hot. Take great care when emptying it.
- Page 17 Do not put liquids containing sugar in the coffee machine. Only add ground coffee or the Miele cleaning tablets for degreasing the brew unit to the ground coffee chute. Do not use any caramelised ready ground coffee. The sugar in the coffee will stick to and block the brew unit of the coffee machine.
- Page 18 Descale the coffee machine regularly depending on the water hardness level in your area. Descale the machine more frequently in areas with very hard water. Miele cannot be held liable for damage arising from insufficient descaling, the use of incorrect descaling agent or the use of descaling agent which is not of the appropriate concentration.
-
Page 19: Using For The First Time
The setting is now saved. prompted to set the following: – Language – Date – Time – Display (Time of day display) ^ Touch the On/Off sensor K. The welcome message "Miele - Willkommen" will appear in the display briefly. -
Page 20: Water Hardness
Using for the first time Water hardness Display You can choose from the following The water hardness level indicates how options: much calcium is dissolved in the water. The higher the calcium content, the – On: the display will always show the harder the water, and the harder the date and time (even when the water, the more often the coffee... - Page 21 Using for the first time Checking the water hardness level You can use the test strip supplied to check the water hardness level, or your local water supplier will be able to advise you on the hardness of the water in your area.
-
Page 22: Operation
You are in the drinks menu when the display shows: Touch the OK sensor to confirm your selection. Miele Exiting a menu or cancelling an action Select drink Touch # to exit the current menu. If none of the sensors has been... -
Page 23: Filling The Water Container
Filling the water container Change the water every day to prevent a build-up of bacteria. If the coffee machine is plumbed into the mains drinking water supply, the water container will fill automatically as soon as the machine is switched on. The inlet device in the lid ensures that the water is taken in slowly. -
Page 24: Filling The Coffee Bean Container
Filling the coffee bean container If you want to use freshly ground coffee Tip: You can use a nut or seed grinder beans for each cup of espresso or to grind green coffee beans. These coffee, fill the coffee bean container types of grinder generally have a with roasted coffee beans. -
Page 25: Switching The Coffee Machine On And Off
Switching the coffee machine on and off Switching on Switching off ^ Touch the On/Off sensor K. When the machine is switched on it heats up and rinses out the pipework. If coffee has been dispensed, the This cleans and heats the pipework in coffee machine will rinse the coffee preparation for making coffee. -
Page 26: Adjusting The Central Spout To The Correct Cup Height
Adjusting the central spout to the correct cup height You can adjust the central spout to suit the height of the cup you are using so that the coffee or espresso will not cool down as quickly and the crema will have a better consistency. -
Page 27: Making Drinks
Making drinks Espresso, Coffee or Long Making two portions coffee You can dispense two portions of espresso or coffee at once into one cup or into two separate cups simultaneously. To dispense two cups of coffee or espresso at the same time: ^ Place a cup under the central spout. -
Page 28: Cancelling Preparation
Making drinks Cancelling preparation You can interrupt the process at any time, by Drink preparation can be cancelled ^ touching the OK sensor or x . while "Stop" is showing in the display. ^ Touch the OK sensor. You can use the "Coffee pot" function twice in succession. - Page 29 Making drinks Adding ready ground coffee "Use ground coffee?" will appear in the display. Use the coffee spoon supplied. Making espresso and coffee using Do not add more than one level ready ground coffee spoon of ground coffee to the coffee chute.
-
Page 30: Drinks With Milk
Making drinks Drinks with milk You can use milk to make different coffee specialities, hot milk or milk froth. The following can be made: Cappuccino: consists of two thirds milk froth and a third espresso. Latte macchiato: consists of a third hot milk, milk froth and espresso. -
Page 31: Making Drinks With Milk
Making drinks Making drinks using a profile Making drinks with milk ^ Place a suitable container If you have set the machine up for a underneath the central spout. specific user profile you can select this before you make a drink. ^ Touch the sensor for the drink you ^ Touch {. -
Page 32: Coffee The Way You Like It
Coffee the way you like it To set the coffee machine for the type of coffee you are using, you can To avoid damaging the grinder: change the amount of coffee, set the brewing temperature or switch on the Only ever adjust the grinder by one "Pre-brewing option in the "Parameters"... -
Page 33: Displaying And Altering The Parameters For A Drink
Coffee the way you like it ^ Touch the arrow sensors until Displaying and altering the "Amount of coffee" is highlighted. parameters for a drink Touch the OK sensor. ^ Touch ,. ^ Touch the arrow sensors to alter the The , sensor will now light up. -
Page 34: Pre-Brewing The Coffee
Coffee the way you like it ^ Touch the arrow sensors until "Brew temperature" is highlighted. Touch the OK sensor. The brew temperature setting which is currently selected will have a tick ( beside it. ^ Touch the arrow sensors until the temperature you want is highlighted. -
Page 35: Setting The Portion Size
Setting the portion size Setting the portion size when The flavour of the coffee produced depends on the type of coffee, how making a drink finely the beans are ground and the quantity of water used. Setting the portion size for You can programme the amount of Espresso ., Coffee / and Long water used for espresso, coffee or hot... - Page 36 Setting the portion size Setting the portion size for Setting the portion size for Caffè Cappuccino and Latte macchiato latte, hot milk and milk froth ^ Place a suitable container ^ Place a suitable container underneath the central spout. underneath the central spout. ^ Touch H or k until "Portion size"...
-
Page 37: Calling Up Portion Sizes From The Menu "Parameter
Setting the portion size Calling up portion sizes from Setting the portion sizes for the menu "Parameter" , different profiles ^ Touch ,. You can set the portion sizes for the individual drinks in each profile ^ Touch the arrow sensors until the ^ Touch {. -
Page 38: Setting Up Profiles
You can now create a profile. appear in the display. If you have already created a profile in ^ Repeat the process until the name addition to the standard Miele profile, required appears in the top line of the you have the following options: display. -
Page 39: Selecting A Profile
This selection is only possible if you have already created a profile in have already created a profile in addition to the standard Miele profile. addition to the standard Miele profile. ^ Touch the arrow until "Select profile" ^ Touch the arrow sensors until "Delete is highlighted. -
Page 40: Changing A Profile
– Manually: The currently selected profile will remain active until you select another profile. – After each use: The machine will change back to the Miele standard profile automatically after a drink is dispensed. – When switched on: Each time the... -
Page 41: Settings Menu
Settings menu Changing and saving settings You can use the "Settings" menu to customise the coffee machine to suit ^ Touch X. your requirements. ^ Select the setting you want with the arrow sensors and touch the OK Calling up the "Settings" menu sensor. -
Page 42: Possible Setting Options
Settings menu Possible setting options The factory setting for the option is shown in bold. Option Available settings Language Deutsch, English and other languages Country Time Display Off / On / Night dimming Clock format 12 h / 24 h Date Timer Timer 1... - Page 43 Settings menu Option Available settings Mains water On / Off Showroom programme Demo mode (On/ Off) Factory default Do not reset Reset...
-
Page 44: Language
Settings menu Language Setting the time You can select the language (and Use the arrow sensors to set the hours country variant of that language) for all and minutes. the display text. Date Tip: If you select the wrong language by mistake, follow the flag symbol F to Use the arrow sensors to set the year, find the Language option again. - Page 45 Settings menu Selecting a timer Switch off after The options are: The "Switch off after" timer function is only available in Timer 1. – Timer 1: Switch on at, Switch off at, Switch off If none of the sensors have been after touched or a drink has not been made, –...
-
Page 46: Eco Mode
Settings menu Lighting Activating and deactivating the timer If the timer is activated for "Switch on You have the following options: at", the + symbol and the desired – You can set the brightness when the switching-on time appear in the display machine is switched on. -
Page 47: Info (Display Information)
Settings menu Info (Display information) Display brightness In the "Info" option, the number of Alter the Display brightness using the portions prepared for each individual arrow sensors. drink can be displayed. Volume You can also see whether more than 50 portions can be dispensed before the You can alter the volume of the buzzer machine needs to be descaled ("No. -
Page 48: Factory Default
Settings menu Factory default Demo mode (Showroom programme) You can reset the settings back to the ones which were set when the coffee Do not activate this setting for machine was delivered - the factory domestic use! default settings. The coffee machine can be Please refer to the "Possible setting demonstrated in the showroom or at options"... -
Page 49: Cleaning And Care
Cleaning and care Quick guide Clean the coffee machine every day to prevent a build-up of bacteria. Recommended frequency What do I have to clean / maintain? Every day the milk flask and lid (at the end of the day) the water container the waste container the drip tray and the drip tray cover... - Page 50 Cleaning and care Danger of burning. All surfaces are susceptible to Allow the coffee machine to cool scratching. Scratches on glass down before cleaning. Please be surfaces could even cause a aware that the water in the drip tray breakage. will be very hot.
-
Page 51: Rinsing The Coffee Machine
Cleaning and care Rinsing the coffee machine Milk pipework When a coffee drink has been All parts of the milk system need to dispensed, the coffee machine rinses be cleaned thoroughly and regularly itself before switching off to remove any remaining coffee residue. - Page 52 When the number of days reaches 0, coffee machine. It is available to order "Clean milk pipework" will appear in the from Miele (see back page for contact display. You cannot make drinks with details), your Miele dealer or via the milk until cleaning has been carried out.
-
Page 53: Milk Flask And Lid
Cleaning and care Milk flask and lid It is important to keep the neck and flange of the flask clean (whilst filling it and carrying it). If the flask is dirty it could cause a fault with the machine. ^ Clean the milk flask holder on the coffee machine with a damp cloth. -
Page 54: Central Spout
Cleaning and care Central spout Clean the stainless steel cover of the central spout by hand only using hot water and a little washing-up liquid. All other parts are dishwasher safe. ^ Pull the central spout down as far as ^ Hold the magnets at the side and pull forwards to release the unit. -
Page 55: Conditioning The Milk Valve
Cleaning and care Conditioning the milk valve The milk valve should be cleaned once a week to ensure good quality milk froth. ^ Touch x. ^ Touch the Y arrow until "Maintenance" is highlighted. Touch the OK sensor. ^ Touch the arrow sensors until "Condition milk valve"... -
Page 56: Water Container
Cleaning and care Water container Waste container Change the water every day to prevent After a certain period of time a reminder a build-up of bacteria. to empty the waste container will appear in the display. The waste Make sure that the valve, the container must be cleaned when this underside of the water container message appears. -
Page 57: Drip Tray
Cleaning and care Drip tray Make sure that the metal contact discs on the drip tray are cleaned Clean the drip tray every day to and dried properly. The discs will not prevent unpleasant odours and be able to detect that the drip tray is mildew. -
Page 58: Coffee Bean Container
Cleaning and care Coffee bean container Central spout connector ^ Take the coffee bean container out of The part which connects the brew unit the machine and then push the lid and the central spout is located on the back to remove it. inside of the machine door. -
Page 59: Interior And Machine Front
Cleaning and care Interior and machine front Brew unit ^ First take out all removable parts and Clean the brew unit by hand only then clean the interior and the using hot water. Do not use machine front with a mild solution of washing-up liquid or any other hot water and washing-up liquid. -
Page 60: Degreasing The Brew Unit
These have been specially formulated for use in this coffee machine and are available to order from Miele (see back ^ Wipe any remaining coffee off the page for contact details), your Miele filters. One filter is located in the dealer or via the internet at www.miele-... -
Page 61: Machine Front
Cleaning and care ^ Switch the machine on with the On/ ^ Follow the instructions given in the Off sensor K. display. ^ Touch x . When "Prog. finished" appears in the display: ^ Touch the Y arrow until ^ touch the OK sensor. "Maintenance"... -
Page 62: Descaling
The following message will appear this coffee machine and are available to in the display: "No. of uses until order from Miele (see back page for appliance needs descaling: 50". The contact details), your Miele dealer or remaining number of drinks that can be via the internet at www.miele-shop.com. -
Page 63: Descaling When Not Prompted By A Message
Descaling ^ Fill the water container up to the mark ^ Touch the OK sensor. with lukewarm water. The coffee machine has now been descaled and can be used for making drinks again. When descaling the machine, wipe up any spillages or splashes of descaling agent immediately. -
Page 64: Problem Solving Guide
(see back cover for contact details). Messages in the display ^ Follow the instructions to remedy the problem. ^ If after this, the fault message appears in the display again, contact Miele. Message Possible cause and remedy Fault 1 to 4 There is a fault inside the machine. - Page 65 Problem solving guide Message Possible cause and remedy Fault 73 The brew unit cannot move into the correct position or it is dirty and the ground coffee cannot be processed. ^ Try to remove the brew unit (see "Cleaning and care – "Check the brew Brew unit").
- Page 66 ^ Fill the water container with fresh tap water up to the F symbol and start the descaling process again. If after this, the fault message appears in the display again, contact Miele.
- Page 67 The main fuse has tripped due to a problem with the coffee machine, the electricity supply or another appliance. ^ Switch off at the wall socket and unplug it. ^ Contact a qualified electrician or Miele. The coffee The switching off time programmed using the timer has been machine switches reached.
- Page 68 Problem solving guide Problem Possible cause and remedy The coffee The system lock is activated. ^ Deactivate the system lock (see "Settings - System lock"). machine does not switch itself on, although the The day of the week has not been selected. ^ Check the timer settings and change these if necessary "Switch on at"...
- Page 69 Problem solving guide Problem Possible cause and remedy There is no milk or The milk pipework or the air intake tube is blocked. ^ Follow the instructions in "Cleaning blockages from the milk froth being dispensed from milk pipework". the central spout. "Fill and insert milk The lid of the milk flask could be dirty preventing the sensors flask"...
- Page 70 Problem solving guide Problem Possible cause and remedy The water container became empty while a drink was being made, however, "Mains water - On" is selected and the coffee machine has not been plumbed in to the mains water supply. ^ Check the setting for the mains water suppy (see "Settings - Mains water").
- Page 71 ^ Fill the container with fresh beans. noise than usual. There could be stones in amongst the coffee beans. ^ Switch the coffee machine off immediately. Contact Miele. Espresso or coffee The coffee is too coarsely ground. ^ Set the grinder on a finer setting (see "Grinder setting").
- Page 72 Problem solving guide Problem Possible cause and remedy The crema on the The grinder setting is not correct. ^ Set the grinder on a finer or coarser setting (see "Grinder coffee or espresso is not as it should setting"). The brewing temperature is too high for this type of coffee. ^ Set a lower brewing temperature (see "Brewing temperature").
-
Page 73: Cleaning Blockages From The Milk Pipework
Cleaning blockages from the milk pipework Step 1: Cleaning the milk If you notice that the quality of the milk froth is not satisfactory, this could be pipework in the lid of the milk caused by a blockage in the air intake flask tube. - Page 74 Cleaning blockages from the milk pipework To reassemble the lid:. ^ First insert the seal in the lid. Then fit the milk intake tube into the seal. Make sure that you do not fit the slanted end of the milk intake tube into the seal.
- Page 75 Cleaning blockages from the milk pipework Step 4: Conditioning the milk valve ^ Touch x. ^ Touch the Y arrow until "Maintenance" is highlighted. Touch the OK sensor. ^ Touch the arrow sensors until "Condition milk valve" is highlighted. Touch the OK sensor. The milk valve will move into the ^ Push the tubes back onto the angled maintenance position.
-
Page 76: After Sales / Guarantee
In the event of a fault which you cannot correct yourself, or if the appliance is under guarantee, please contact: – your Miele Dealer – Miele (see the end of this booklet for contact details). Please note that telephone calls may be monitored and recorded for training purposes (UK only). -
Page 77: Saving Energy
Saving energy Changing the following settings from their factory default will increase the energy consumption of the coffee machine: – Eco mode – Lighting – Time of day display – Timer When altering these settings, the message "This setting increases energy consumption"... -
Page 78: Plumbed In Water Connection
Plumbed in water connection Notes on connecting to the The machine is only suitable for connection to a cold water supply, mains water supply which Connection to the mains water – is connected directly to the fresh supply should only be carried out by water supply, to guarantee a qualified and competent person. -
Page 79: Connection To The Water Inlet
Plumbed in water connection Connection to the water inlet A faulty stainless steel hose must only be replaced by a genuine Miele Before making plumbing replacement hose (available from connections, ensure that the Miele). Make sure that the water machine is disconnected from the hose is suitable for food use. -
Page 80: Electrical Connection U.k., Za, Irl
Electrical connection U.K., ZA, IRL All electrical work should be carried out Non-rewireable plugs BS 1363 by a suitably qualified and competent The fuse cover must be refitted when person only, in strict accordance with changing the fuse, and if the fuse cover current national and local safety is lost, the plug must not be used until a regulations (BS 7671 in the UK). -
Page 81: Installation
Building-in and combination options The machine is designed for installation in a tall unit. It can also be combined with other Miele built-in appliances. If the coffee machine is to be built in above another appliance, there must be a full-width, closed shelf between them (except when it is combined with a suitable Miele built-in plate or food warming drawer). -
Page 82: Ventilation
Before installation make sure that with a sealing strip you should fit a there is no power supply to the Miele sealing strip to the machine machine This also applies should it before installing it. This is fitted from ever need to be taken out of its the back of the machine. - Page 83 Installation Tip: It is useful to have somewhere at Four M5 hexagon socket screws are the height of the niche to place the supplied for aligning and securing the machine on. This makes electrical machine in its niche. connection and connection to the ^ Open the front of the machine and plumbed in water supply easier.
-
Page 84: Adjusting The Hinges
Installation Adjusting the hinges If the machine front becomes difficult to open or close after installation you can adjust the hinges to realign it (TX 20): ^ Turn screw a to align the front of the machine so that it is flush with the front of the housing unit. - Page 88 CVA 6405 en - GB M.-Nr. 09 618 391 / 00...