Related Manuals for Miele CVA 4068
Summary of Contents for Miele CVA 4068
- Page 1 Operating and Installation Instructions Coffee System CVA 4062 CVA 4068 en - US, CA To prevent accidents and appliance damage read these instructions before installation or use. M.-Nr. 07 816 880...
-
Page 2: Table Of Contents
Contents IMPORTANT SAFETY INSTRUCTIONS....... . . 4 Guide to the coffee system ......... . 8 Included accessories . - Page 3 Contents Display ............31 Tone options .
-
Page 4: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances basic safety precautions should always be followed, including the following: Read all instructions before installation or use of the coffee system. Proper use Please read these instructions This coffee system is for household carefully to prevent accidents and use only, for the preparation of coffee machine damage. - Page 5 Do not use an extension cord to connect the appliance to electricity. Defective components should be Extension cords do not guarantee the replaced by Miele original spare parts required safety of the appliance only. Only with these parts can the (danger of overheating and open manufacturer guarantee the safety of ground circuit).
- Page 6 Contact Caution! Risk of burns when Miele. dispensing hot beverages, they are extremely hot. Always attach the cord to the appliance first, then plug it into the wall Before the first use, flush the supply outlet.
- Page 7 Never place a cup with an Only use the descaling tablets alcohol-coffee mixture underneath the provided by Miele. Take care to use the main dispenser. Plastic parts of the unit correct mixture of water and descaler, could catch fire! otherwise it may cause damage.
-
Page 8: Guide To The Coffee System
Guide to the coffee system Front view a On/Off s touch control b Display c Left arrow <, to scroll through program options d OK touch control, to confirm selected program options and save settings e Right arrow >, to scroll through program options f Hot water - touch control g Door grip h Hot water dispenser... - Page 9 Guide to the coffee system Interior view a Main switch b Storage drawer c Funnel for ground coffee d Grind control slide e Coffee bean container f Drip tray with no-spill grid for transport g Water tank h Brew unit i Waste unit j Main dispenser connector (connects the brew unit to the main dispenser) k Stainless-steel milk container...
-
Page 10: Included Accessories
To clean the brew unit Cleaning containers Descaling tablets To descale the coffee system Large and small, for rinsing and cleaning the milk pipework Additional accessories are available. Contact Miele or visit the Miele Coffee spoon website for more information To measure ground coffee... -
Page 11: First Steps To Use
First steps to use Touch controls Before the first use Select a touch control with your The appliance must be correctly fingertip to use the machine. installed and connected before the first use. See the "Installation Display Instructions" section of this manual. Espresso Clean the appliance and remove any protective film before the first... - Page 12 First steps to use You will then be prompted to set the If everything has been entered Time format. correctly, Set up successful will appear in the display. ^ Tap < or > until the time format you ^ Confirm the message with OK. wish to select (12-hour or 24-hour) is highlighted, confirm with OK.
-
Page 13: Filling Water, Beans Or Ground Coffee
Filling water, beans or ground coffee Before using the coffee system for the first time, clean the appliance. See "Cleaning and Care". Be sure to program the water hardness (see "Settings - Water hardness"). ^ Pull the water tank out. Filling the water tank ^ Fill the container with fresh, cold tap The beans and the water quality is... -
Page 14: Filling The Bean Container
Filling water, beans or ground coffee Filling the bean container Filling ground coffee A funnel for ground coffee is provided Only fill espresso or coffee beans in in case you would like to prepare a the beans container. Anything else - different coffee type, e.g. -
Page 15: Preparing Drinks
Preparing drinks Water will now flow from the main Clean the coffee system daily to dispenser and into the drip tray. prevent bacterial growth. All parts of The machine will notify you when the the coffee system are drip tray is full, but the tray should be dishwasher-safe except for the brew emptied daily. -
Page 16: Adjusting Main Dispenser Height
Preparing drinks Adjusting main dispenser height Espresso The height of the main dispenser can be adjusted, to keep the shortest ^ Use the arrow buttons to select the distance to the cup and retain heat, and maintain a better crema and froth. desired beverage, confirm by tapping OK once. -
Page 17: Coffee And Espresso Prepared From Ground Coffee
Preparing drinks Coffee and espresso prepared Double portion from ground coffee If you would like a double portion of coffee or espresso, or to prepare two After filling the funnel with ground portions at the same time, coffee (see "Filling water, beans or ground coffee - Filling ground coffee"), ^ tap the OK button a second time, the display shows:... -
Page 18: Beverages With Milk
Preparing drinks Beverages with milk Prepare beverages ^ Place a cup under the main spout. Stainless steel milk container ^ Tap the OK button. The stainless steel milk container is The appliance brews the espresso or vacuum insulated, to keep milk cold for coffee, and the selected beverage is a period of time. - Page 19 Preparing drinks To prepare beverages with milk, Cappuccino, latte macchiato, hot milk, froth ^ Place a suitable cup or glass under both dispensers. For best results when preparing a latte macchiato, place the glass under the spout in such a way that the espresso flows into the middle of ^ place the lid on the stainless steel the froth.
-
Page 20: User Profile Beverages
Preparing drinks User profile beverages After use The user profile function is used to Before turning the machine off, or at prepare beverages to suit your taste, the end of the day, flush the water by adjusting the amounts of water, milk, lines, the brew unit, the spouts and and ground coffee, as well as the milk pipework in order to prevent... -
Page 21: Adjusting The Coffee Grinder
Adjusting the coffee grinder The finer the coffee beans are ground To adjust the grinder setting determines the strength of the coffee and the quality of the crema. To prevent machine damage adjust the coffee grinder one level at a time and let the beans grind before ^ Push the slide control to the left for a adjusting another notch. -
Page 22: Settings
Settings Language The coffee system can be customized to suit individual preferences. You can select the language for all text and messages displayed on your Settings menu machine. ^ Select "Settings F" and confirm with Settings F Settings ^ Tap < or > until Settings C is Language F highlighted. -
Page 23: Time Of Day
Settings Time of day Clock format ^ Select "Settings F", confirm with OK. ^ Use < or > to select "Clock format". ^ Tap < or > to select a 24-hour or Settings 12-hour display. Time of day Timer ^ While the desired option is ^ Tap <... -
Page 24: Timer
Settings Timer Switch off after ^ Select "Settings F", confirm with OK The machine will turn off automatically to save energy after a programmed Settings period of time (ranging from 15 minutes Timer to 9 hours after the last use). When the Coffee jug "Switch off after"... -
Page 25: Coffee Jug (Dispensing Several Servings, One Directly After Another)
Settings Coffee jug (dispensing several Switch off at servings, one directly after A specific time of day can be set to turn another) the coffee system off. ^ Use < or > to select "Switch off at", With this function, you can dispense up to eight servings of coffee, one immedi- confirm with OK. -
Page 26: Amount Of Coffee
Settings Amount of coffee Pre-brewing The amount of coffee will determine During the pre-brew step, the freshly both the strength and the crema of your ground coffee is first moistened with hot brewed coffee. water. After a short steeping period, the remaining water is then forced through Depending on the type of coffee, the the moistened coffee at high pressure. -
Page 27: Temperature
Settings Temperature Automatic rinsing Three temperature settings are It is important to flush out any residual available for each coffee beverage and coffee from the lines when starting to two settings for hot water. use the machine for the day. If the auto- matic rinse function is activated and the Not every coffee type allows high machine is cold, the rinse cycle will... -
Page 28: Steam System
Settings Steam system Lighting: Adjusting the brightness This appliance has two heating systems, making it possible for you to The brightness of the machine lighting prepare milk froth/hot milk and can be adjusted. coffee/espresso, one right after the ^ Select "Settings F", confirm with OK. other. -
Page 29: Lighting: Setting The Switch-Off Time
Settings Lighting: Setting the switch-off Info (displaying No. of drinks) time The "Info" option allows you to display the number of beverages that have Whenever the machine is On, the been dispensed from the machine and machine lighting is also On. The the number of beverages the machine lighting turns off automatically when the can still make before it requires... -
Page 30: System Lock
Settings System lock Water hardness The coffee system can be locked so The hardness of the water used in the that it cannot be used by children or coffee system must be determined and those not familiar with the operating programmed into the appliance. -
Page 31: Display
Settings Display You can program four hardness levels on the machine: The display contrast and brightness – Level 1 (soft): can be adjusted. 0 - 3 gr/gal (0 - 3 °d) ^ Select "Settings F" , confirm with OK. – Level 2 (moderately hard): Settings 4 - 7 gr/gal (4 - 7 °d) Display... -
Page 32: Tone Options
Settings Tone options Showroom program A tone can be selected to confirm the The showroom program is used to selection of a touch control. The volume demonstrate the machine at exhibits. In of the tone can also be adjusted. this demo mode, the machine lighting is On, but the machine does not heat up. -
Page 33: Restoring Factory Default Settings
Settings Restoring factory default Factory default settings settings – Amount of coffee (medium) The "Factory default" setting can be – Temperatures for coffee beverages used to reset different settings back to and hot water (medium for both) their original default status. –... -
Page 34: Setting The Serving Sizes
Setting the serving sizes Setting serving sizes of The flavor of a coffee beverage depends not only on the type of coffee, espresso, coffee, hot milk and but also on the quantity of water used. milk froth using OK Not every espresso or cappuccino cup ^ Place the desired cup under the main is the same size. - Page 35 Setting the serving sizes Setting serving sizes for The appliance now begins preparing a cappuccino or latte macchiato. cappuccino and latte macchiato using OK As soon as the component (which you have checked) is being dispensed, the ^ Place the cappuccino cup or latte display will read "Program the amount".
- Page 36 Setting the serving sizes Setting the serving size for hot Setting serving sizes via water "Settings" ^ Select "Settings F", confirm with OK. ^ Place the desired cup under the hot water dispenser. Settings ^ Tap - until the display reads "Prog. Prog.
-
Page 37: User Profiles
User profiles If the appliance is used by several The following options appear only if you people with different preferences, you have already created a user profile: can save up to 9 individual user – Change user profile to change a profiles. - Page 38 User profiles Creating a user profile Saving an entry ^ Tap < or > until "Create" is ^ Once you have completed an entry, highlighted, confirm with OK. use < or > to select "OK", confirm with OK. Up to 9 user profiles can be created. The display will briefly show the User If you try to create more than 9 user profile welcome screen, followed by the...
- Page 39 User profiles Deleting a user profile Revert ^ Select "Delete user profile", confirm The appliance can be set so that it with OK. automatically reverts to the standard user profile or continues to use the ^ Use < or > to select the user profile most recently selected user profile set.
-
Page 40: Cleaning And Care
Cleaning and care Overview Frequency What needs to be done? Every time mile is prepared, if there Rinse the milk pipework is more than one hour between uses Rinse the system (intake lines) Clean the milk pipework (with cleaning powder) Clean the stainless steel milk container and lid Everyday (at least at the end of the day,... - Page 41 Cleaning and care Rinsing the system Allow the coffee system to cool Before switching your machine off for before cleaning. Danger of burns! an extended period of time, you should clean the supply lines, the brew unit, Do not clean the unit with a steam and the main dispenser.
- Page 42 Cleaning and care Milk pipework Cleaning the milk pipework To prevent milk residue from spoiling or Rinsing the milk pipework drying in the machine and pipework, it To prevent the milk residue from should be cleaned at the end of each spoiling or drying in the machine and day milk was used to make a pipework, you should rinse these lines...
- Page 43 Hang the cleaning container in the appliance where the milk container would normally sit. Use only Miele cleaning agent, which was developed especially for this coffee system. You can obtain this cleaning agent from Miele. Unlock the cover for the milk pipework by pressing in the two brackets on the The cleaning process has now begun.
- Page 44 Cleaning and care ^ Remove the cover with the milk ^ Insert the brush into the milk hoses pipework. Clean the whole part in the one after the other from below. Push dishwasher without taking it apart. the brush back and forth to the end until there is no more no milk residue If there are milk residues in the milk in the hoses.
- Page 45 Cleaning and care Stainless-steel milk container The stainless-steel milk container and lid must be cleaned by hand with hot water. Make sure to keep the top and seals of the container clean. Soiling can affect the functioning of the milk container. ^ Clean the stainless-steel container ^ Then press the milk hoses into the with hot water.
- Page 46 Cleaning and care Main dispenser ^ Pull both rubber stoppers out and clean the stoppers and nozzles ^ Pull the main dispenser all the way thoroughly. down a and pull the cover forward to ^ Put the rubber stoppers back into remove b.
- Page 47 Cleaning and care Water tank Waste unit Empty the water tank daily and refill The display shows a message to empty before preparing the first drink with the waste unit. Clean the waste unit fresh, cold tap water. daily. Coffee waste can mold if there is water in the waste unit from the rinse Check if the valve is clean.
- Page 48 Cleaning and care Drip tray ^ Wash the drip tray and grid in the dishwasher or by hand with hot water The trip tray contains a sensor which and liquid dish soap, then dry with a causes the display to show when the soft cloth.
- Page 49 Cleaning and care Bean container Interior and door ^ Once all movable parts are removed The bean container must be cleaned clean the interior with a solution of hot by hand with hot water and liquid water and liquid dish soap. dish soap.
- Page 50 Cleaning and care Brew unit Manually clean the brew unit weekly. The movable parts are lubricated and the cap will get damaged in the dishwasher. Do not use a dishwasher this will cause damage. ^ Take out the water tank, waste unit and the storage drawer.
- Page 51 ^ Select "Clean brew unit", confirm with degreasing. The cleaning tablets can be purchased from Miele. ^ Select "Start", confirm with OK. As a reminder the display shows ^ Follow the instructions in the display.
- Page 52 Cleaning and care When the display prompts you to Only use a slightly damp sponge Please drop the cleaning tablet in the when cleaning the controls. Water ground coffee funnel. could penetrate into the electronics and cause damage. The external surfaces of the coffee machine are susceptible to scratching.
-
Page 53: Descaling The Appliance
The display will show "Please descale The descaling tablets can be the coffee system. Remaining number purchased from Miele. of servings: 50". This message will now Other agents may damage the appear after each preparation. - Page 54 Descaling the appliance Descaling To dissolve the descaling tablets: ^ Remove the water tank and fill it up to the k mark with lukewarm water. Maintenance (Do not under-fill the water tank, because this will cause the descaling ^ Tap < or > until "Maintenance m" is cycle to end prematurely, before highlighted, confirm with OK.
-
Page 55: Frequently Asked Questions
See "Settings - Timer - Switching off after". – There could be pebbles within the – Call Miele's Technical Service coffee beans. The unit shuts off after Department. 20 secs. to avoid damage. - Page 56 There could be pebbles within – Turn off the unit immediately. the coffee beans. – Contact the Miele's Tech. Service if the bean container is not empty. Otherwise fill the container with fresh beans. The coffee/espresso flows too fast into the cup.
- Page 57 Frequently asked questions The coffee/espresso is not hot enough. Possible fault Solution – Were the supply lines and cup – The smaller the cup, the more important pre-heated? it is to pre-heat. – The temperature is set too low. – Check on what temperature range the coffee type is set.
- Page 58 Frequently asked questions Instead of coffee only water is dispensed. Possible fault Solution – The beans may have gotten stuck. – Pull the bean container out and push it back in. – The ground coffee funnel cover was opened and closed and a preparation with ground coffee was selected but no ground coffee was inserted.
- Page 59 Frequently asked questions Water is in the waste unit. Possible fault Solution This is not a fault. This is residual water from the cleaning process. "Coffee water" is in the waste unit. Possible fault Solution If the grind setting is too coarse, this Adjust the grind setting and/or amount can result in too much coffee water in of coffee.
- Page 60 Frequently asked questions No crema has formed or it is "different". Possible fault Solution – Check if the grind setting is too – Adjust the grind setting. coarse or too fine. – Check what temperature range the – Lower the temperature and amount coffee type is set.
- Page 61 Frequently asked questions The storage drawer cannot be pushed in properly. Close the lid of the ground coffee funnel. The door is hard to open and close. – Adjust the door with the door hinges. See "Installation - Adjusting the door hinges".
- Page 62 The brew unit motor will automatically move to the correct position. ^ When the message "Fit the brew unit" appears, open the door and insert all parts into the machine. ^ Close the door. If the message still shows contact Miele Technical Service.
-
Page 63: After Sales Service
Miele’s Service department, Extended Service Contracts offered by other providers for Miele products will not be recognized by Miele. Our goal is to prevent unauthorized (and untrained) service personnel from working on your Miele products, possibly doing further damage to them, you and/or your home. -
Page 65: Installation Instructions
Installation instructions Information is subject to change. Please refer to our website to obtain the most current product specification, technical & warranty information. -
Page 66: Caring For The Environment
Caring for the environment Disposal of packing material Disposal of an old appliance The cardboard box and packing Old appliances may contain materials materials protect the appliance during that can be recycled. Please contact shipping. They have been designed to your local recycling authority about the be biodegradable and recyclable. -
Page 67: Electrical Connection
If there is any question concerning the electrical connection of this appliance to your power supply, please consult a licensed electrician or contact Miele’s Technical Service Department. See back page for contact information. -
Page 68: Installation
Miele appliances can be installed flush or proud. Discuss your installation requirements with your architect, designer and installer. A combination with other Miele built in appliances is possible. If the machine is installed in combination with other appliances, it should be installed with a protective base between the appliance and the unit (exception: installation with a built-in plate warmer). - Page 69 ^ Plug the appliance into the electrical outlet. ^ If there is no sealing strip around the installation recess, stick the Miele sealing strip onto the appliance from the back before putting it into the recess. Sealing strips are available...
-
Page 70: Adjusting The Door Hinges
Installation Adjusting the door hinges The door hinges can be adjusted if the door cannot be opened easily. ^ Push the appliance into the niche. ^ Open the door and partially tighten ^ To adjust the door sideways, a, turn the screws. - Page 72 Alteration rights reserved / 0710 M.-Nr. 07 816 880 / 00 CVA 4062, CVA 4068 INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.