Setting The Plumbed In Water Supply; Showroom Programme; Resetting The Factory Default Settings - Miele CVA 5065 User Manual

Settings: Customising your machine
Setting the plumbed in water
supply
The machine is designed to be
plumbed into the mains drinking water
supply. Water is automatically taken
into the water container when the
machine is set up for a plumbed
supply. If this option is switched off the
water container has to be filled
manually.
^ Select "Settings F" from the main
menu, and then touch the OK sensor.
Settings
Plumbed water supply
Showroom prog.
^ Touch the right arrow sensor until
"Plumbed water supply" is highlighted
and touch the OK sensor.
^ Touch one of the arrow sensors to
select "On" or "Off", and then touch
the OK sensor.

Showroom programme

This function enables the machine to be
illuminated in a showroom situtation
without the heaters working.
40
Resetting the factory default
settings
The "factory default" setting is used to
reset the various settings back to the
default status.
From here you can select whether to
reset all settings back to the default or
to delete any user profiles.
^ Select "Settings F" from the main
menu, and then touch the OK sensor.
Settings
Factory default
Back #
^ Use an arrow sensor to highlight
"Factory default", and then touch the
OK sensor.
Various options will then be available:
All settings
This option sets "All settings" back to
the factory default.
^ Select "Reset" under "All settings",
and touch the OK sensor.
All settings are then reset to the default.
If you select "Reset" by
mistake, switch the coffee
machine off: Resetting to the
factory defaults will not be carried out.