Water Hardness; Brightness; Volume; Activating And Deactivating The Plumbed Water Supply - Miele CVA 6805 Operating And Installation Instructions

Settings
Overriding the system lock
While the display shows "Press for 5
seconds to unlock",
^ touch the lock symbol for 5 seconds.
As soon as the coffee system is
switched off, the system is locked
again.

Water hardness

You will find the information on water
hardness in the chapter "First steps to
use".

Brightness

You can set the brightness of the
display in the bar chart.

Volume

You can adjust the volume of the audio
signals and keypad tones in the bar
chart.
Activating and deactivating the
plumbed water supply
The system is designed to be used with
a plumbed connection to cold tap
water. If the water supply is turned on,
the water tank is automatically filled via
the cold water line. If the water supply
is turned off, you will need to fill the
water tank by hand.

Adjusting the dispensers

You can find the information on
dispenser adjustment in the chapter
"Dispenser adjustment".
46

Factory default settings

You can reset the settings back to the
factory default settings and also delete
the MyMiele entries.
Please refer to the "Overview of the
setting options" chart for the factory
default settings.
The following settings will not be
reset:
- Language
- Time of day
- Number of drink portions
- Profiles
Showroom program (demo
mode)
Do not activate this setting for
domestic use.
The coffee system can be presented in
"Demo mode" for showrooms or
exhibitions. In this mode the system
lights up, but no drinks can be
prepared or actions carried out.
The coffee system cannot be turned
off with the On/Off sensor K when
demo mode is activated.