Table of Contents
Advertisement
User's Manual
05 Chapter 2
Serial menu
Baud rate
Pacing
DTR polarity
ROBUST XON
Network menu
NPAP mode
BootP
IP address
IP netmask
IP gateway
Clear warning
<Clear warning> print unit
29
Data transfer speed on the serial interface
Protocol of the serial interface
Level of the DTR signal in the DTR protocol
ROBUST mode in the Xon/Xoff protocol
Whether the NPAP commands are used.
When using MarkVision™, the NPAP mode
must be Auto or On.
Whether the TCP/IP protocol that enables a
workstation to find its IP address is enabled or
disabled for the network adapter
A unique address of the printer in the TCP/IP
network environment
Bit mask that logically subdivides the network,
specifying a local network portion of the IP
address
A unique address of the equipment for the
gateway to outside of the enclosed
environment
Clearing the print unit counter
27.01.1999, 15:36 Uhr
Menu Items
PRINTING AND
PAPER HANDLING
2-29
Advertisement
Table of Contents
