Fujitsu PrintPartner 20W User Manual page 161

Print Quality Problems
5-20
08 Chapter 5
What happened?
• Toner comes off
easily when
touched with
fingers.
• Whole paper is
painted with a
specific color.
• Nothing is
printed.
20
Typical case What to investigate
• Paper is • Replace the paper with new
dampish. one.
• Unsuitable • Load proper paper.
paper is used. See "Paper Types and
Sizes" in Chapter 2.
• Thicker paper • Use the thick paper mode.
is used. See "Selecting the Thick
Control Menu" in Chapter
2.
• The print unit • Replace the print unit with
is deteriorated new one.
or damaged. See "Replacing the Print
Unit" in Chapter 4.
• There is a fault • Contact your dealer.
in the high
voltage power
supply.
• Multiple sheets • After removing the paper
of paper have from the cassette or tray,
been fed at a loosen the sheets well and
time. load them again.
• No toner. • Replace the toner bottle
with new one.
See "Replacing the Toner
Bottle" in Chapter 4.
• The print unit • Replace the print unit with
is deteriorated new one.
or damaged. See "Replacing the Print
Unit" in Chapter 4.
• There is a fault • Contact your dealer.
in the high
voltage power
supply.
27.01.1999, 15:39 Uhr
User's Manual