Table of Contents
Advertisement
Control Panel Functions
2-16
05 Chapter 2
Selecting the Thick Control Menu (
This printer has the thick control menu which allows you to select
one of the two thick control modes for adjusting the printer for
paper thickness. One is the normal mode (factory default) and the
other is the extension mode.
The normal mode allows you to print thick paper, but has only one
choice between two options (ON for thick paper and OFF for
ordinary paper). This choice is common to all paper sources: tray 1,
trays 2 to 4 (if installed), and MFF (in first/cassette mode or manual
feed mode).
The extension mode allows you to print several kinds of thin paper,
thick paper, and thick envelopes for every paper sources: eight
options for every tray 1, trays 2 to 4 (if installed), or MFF (in first/
cassette mode or manual feed mode).
When one mode is selected, you cannot use the other mode.
To select a thick control mode, follow these steps:
1. Turning the printer on while pressing and holding down
.
TRAY SELECT
TRAY SELECT
The message indicates
printer initialization. The asterisk means that normal mode is
selected for paper thickness.
2. Select a desired mode.
Press the
or
+
the
button. The asterisk appears and the mode is selected.
ENTER
3. Save the selection.
Press the
READY
READY
ready state.
This selection remains even if you turn the printer off.
16
TRAY SELECT
TRAY SELECT
THICK CONTROL
button until the desired mode appears. Press
–
button to save the new setting and return to the
27.01.1999, 15:35 Uhr
)
NORMAL*
after
User's Manual
Advertisement
Table of Contents
