Eizo SCD 19102 Instruction Manual page 49

Main menu
SCD 19102 / SMD 19102
Instruction Manual, 05/2008, A5E01588521A-002
Function
ADC calibration
DVI enhancer
Status
Adjustment/range
Execute
Information
Commissioning
7.3 Description of OSD menu
Description
Automatically calibrate A/D
converter for the applied
video level
The video level range of the
system is checked, and the
display set accordingly. This
results in optimum
adjustment of the individual
RGB A/D converters to the
video source.
The calibration results in a
larger and more flexible
video level range (e.g., the
full brightness is also
achieved at 700 mV if the
video level is limited at this
value).
Note
A specific test pattern and
timing are prerequisites!
The A/D converters have
already been factory-set and
need not be readjusted.
Enhances the DVI-D signal
quality over long distances,
even when standard cable is
used
Current display settings in
the respective picture mode
can be called here.
Operating hours of the
•
display
Temperature in the
•
housing (actual and
maximum temperature
over the complete service
life of the display)
Firmware type and
•
version
OSD version
•
Configuration version
•
Current timing
•
Current source
•
Screen resolution
•
Frequency of the input
•
signal (line frequency and
refresh rate)
49