Eizo SCD 19102 Instruction Manual page 39

Main menu
Position / zoom (not for
analog picture signal)
SCD 19102 / SMD 19102
Instruction Manual, 05/2008, A5E01588521A-002
Function
Backlighting
Color
(SCD 19102 only)
User color
(SCD 19102 only)
→Red color temp.
→Green color temp.
→ Blue color temp.
H position
Adjustment/range
0 ... 100 %
Recommended setting: Max.
80 %
1, 2, 3, User
1: 9300°K
2: 7300°K
3: 6500°K (native)
User factory setting: "6500
°K (native)".
This color can be set by the
user)
Default: 1 (6500°K)
Define user color temperature
The color setting defined here can be subsequently selected
using the color function (selection "User").
Note
If the color location setting is corrected with "User color",
some color levels may be lost. To prevent this from
happening, the colors can be corrected via "LUT" with
SMfit® Total Care.
-32 ... +32
-32 ... +32
-32 ... +32
0 ... 100 %
Commissioning
7.3 Description of OSD menu
Description
Adjust brightness of display
backlighting
Adjustment of overall
brightness to ambient
lighting.
Note:
If the function "Backlight
Command" is activated in the
"Others → LUT" menu, the
backlight setting cannot be
changed.
Set the desired color
temperature or hue
Three fixed color
temperatures and one
adjustable color temperature
can be selected.
Color locations 1 and 3
cannot be saved. They only
remain active while the
timing is applied.
Note:
The user color setting can be
changed when "User" is
selected.
Select red component of
display
Select green component of
display
Select blue component of
display
Shift picture in horizontal
direction
With identical display and
graphics card settings, the
complete picture to be
displayed fills the display
area of the monitor with the
exact number of pixels.
39