Safety Notes - Eizo SCD 19102 Instruction Manual

Safety notes

Guarantee perfect operation - even in the medical sector
Please note that LC displays such as the SCD / SMD 19102 do not exhibit a zero error rate
and that the image parameters can change over time (e.g. color density or distortion/fading
of colors). Please ensure that all necessary steps are taken to avoid violations or incorrect
diagnoses. Regular maintenance and calibration are recommended.
Perfect, safe and reliable operation of the display requires that it has been professionally
transported, stored, mounted and installed as well as carefully operated and maintained. The
unit must only be used for applications for which displays are normally used. The technical
specifications of the product must be observed.
In the interests of safety, the following precautions must be observed:
There is a danger to life if warnings are not obeyed. Severe personal injury or damage to
property may occur.
Do not open the unit yourself
Certain components inside the units operate at high-voltage, i.e. touching these
components represents a danger to life!
Only use a power cord in perfect condition
A damaged power cord may result in a fire or electric shock. When disconnecting the power
cord, always do so by holding the plug.
Do not insert any objects into the housing
Objects inserted into the housing may result in damage to the unit or personal injury.
Do not place any objects on top of the units
Penetrating liquids may result in a fire or electric shock.
Connecting
There must be no contact to a patient when handling the connection cables.
If the SCD / SMD 19102 is mounted on a stand:
Adjust the display height carefully, otherwise danger of injury
When adjusting the height of the display, make sure that you do not trap your fingers or any
other objects.
SCD 19102 / SMD 19102
Instruction Manual, 05/2008, A5E01588521A-002
DANGER
2
11