New Portal; Video Services - Motorola VIP 1910 Installation Instructions And Manual

The program of the TV channel, which you are watching, is displayed as the initial one with respect to the
actual time.
Operation of the full EPG is as follows:
 PAN buttons (arrows) left / right – switching between days (can be seen at the very top)
 Cursor keys (arrows) left / right – switching between channels (can be seen under it); only in the
vertical display form
 Cursor and PAN buttons (arrows) left / right – shift in time, by individual programs in the list /
quickly
 Context buttons (coloured buttons at the bottom of the control)
červené
– – recoding of the current or selected program
green
– – Enhanced TV / options –
bellow. This button can be used even while watching TV (if EPG is not shown).
yellow
– – at the complete EPG – switching the EPG display:

Horizontal – easier display without detailed description of the programs

Vertical – more detailed
– at a quick EPG – switching between audio tracks (more languages, if available)
blue
– – at the complete EPG – activating function My TV, see bellow
– at the quick EPG – switching between subtitles (more languages, if available)
The so-called quick EPG may be displayed by pressing OK in the course of regular TV watching.
The number of the channel is displayed, the name of the program and its short description, time and other
information. For the purpose of watching TV, press OK again.
If you click, while watching TV, on the cursor arrow key "left" or "right", the quick EPG is displayed and
the list of all channels. Between them, you may move using the cursor arrow keys. By pressing OK, you
get the selected channel - it serves for the purpose of quick switching to a certain TV channel if you do
not know, in which position exactly it is located.
Note: the EPG is not available for all programs, in particular in case of foreign ones.
My TV
– the channel 0 (zero) is reserved for your own television. There you may compose a channel
of your own from all channels on offer depending on your taste. How does it work? In the EPG
(we recommend using the horizontal EPG, which is more clear for this purpose), you select a program
which you wish to watch. It may be on an arbitrary channel, at any time or on any day (within the scope
determined by the EPG). Then press the blue button (active on the screen as
the respective program in added to My TV and is displayed in the EPG in position 0.
Subsequently, if you are watching television, then, upon oncoming beginning of the selected program,
the EPG will inform you and will ask you whether it should switch to the respective program. With My TV
you will never miss any beginning of your favourite program any more.
If two or more programs are broadcast at the same time, it is possible to define their priorities with the My
TV blue button. Using this button, you also remove the already inserted programs.
Note: the times of beginnings and ends of the programs with which My TV works are determined by
the respective broadcast scheme of the individual TV stations. If there is e.g. a delay in their
broadcasting, My TV unfortunately is not able to do anything about it. For the purpose of commercials,
most TV stations does not broadcast the so-called AVS signal informing when exactly the respective
program begins.
7.1.2

New Portal

Switches to the new version of the Portal, which is described further. The switch takes 10-20 seconds.
7.1.3

Video services

This section enables viewing programs previously saved with the video recorder.
 Video recorder – contains programs which you have recorded with the virtual video recorder.
The recordings are saved to central T-Systems servers, so there is nothing saved in the actual
set-top box and it is not necessary to connect any additional devices.
viaTV_STBmanual_M1910_EN.doc
displaying options what you can do with a current program, see
+ My TV). In this way,
Page 15 (Total 38)