Motorola VIP 1910 Installation Instructions And Manual page 18


STB settings
Various set-top box settings:
STB information
o
Displays basic information on the set-top box – its serial number, IP and MAC address,
etc. For the purpose of the standard operation, it is not relevant for a common user.
Video output setup (scart connector only)
o
This item sets the video output for the scart connector, see the figure. In the left part, the
output format is to be set, in the right part, the TV standard. Both the items may be
changed independently. The output format may be set only for analogue standard
definition using the scart connector. Which output and the reason why to select it has
been described in part 3.
For HD definition, it is necessary to set the output format directly in the firmware of
the set-top box, see section 3.2 of this instruction manual.
TV aspect setup
o
viaTV_STBmanual_M1910_EN.doc Page 18 (Total 38)