3.4 Save and leave setting
Press the right arrow for return to the main menu and go down using the navigation arrow to Exit, then
press OK. Then the set-top box asks you whether you wish to save the respective setting.
For the purpose of saving the changes, select Save and reboot, for the purpose of not saving, select
Reboot without saving.
The set-top box is then restarted and prior to se restart, it either saves (Save and reboot) or does not
save (Reboot without saving) the respective changes. The restart of the set-top box lasts approximately
4 minutes.
3.5 Set-top box setting using the viaTV Portal
Once the set-top box is under standard operation (it is possible to watch programs), it is possible
to perform some setting in the so-called viaTV Portal (more information on the Portal is to be provided in
the following chapter). Specifically, this concerns the TV standard (PAL/NTSC) setting and setting of the
output for a standard television set using a scart connector.
viaTV_STBmanual_M1910_EN.doc
Page 8 (Total 38)