Error Messages - Olivetti Nettun@3000 User Manual

confirm the settings made and
return to the start of the SET mode
cancel an error message
when programming a department
field, skip to the next department to
program the same field
When programming sales prices, the decimal separator is inserted automatically
when you enter amounts consisting of whole figures.
On the other hand, the decimal separator must be entered manually for amounts with
decimal figures.

ERROR MESSAGES

The error messages listed here are those that appear most frequently when using
Programming mode.
MESSAGE
EXCEEDED CAPACITY
OVER MAX. LIM.
SEQUENCE ERROR
NOT ALLOWED
8-2
press . Total
press .C.
Press .Subtotal.
The values set exceed the number of figures allowed.
The value set is not included among the permitted values.
The key pressed is not allowed.
The operation requested is not allowed.
.
MEANING