Inserting Paper; Safety Precautions And General Standards Of Use - Olivetti Nettun@3000 User Manual

INSERTING PAPER

WARNING: Only Mitsubishi F5041 thermal paper should be on the cash
register. Different types of thermal paper, especially paper that is
too thin, could result in incorrect advancement of the ticket.
The writing and logos on the back of the ticket also must not be
visible on the front due to the transparency of the paper.

SAFETY PRECAUTIONS AND GENERAL STANDARDS OF USE

Note: read this section carefully before using the product.
•
Check that the electrical data of the cash register (230 V AC, 50/60 Hz) match
those of the mains supply.
•
Connect the cash register to a compliant electrical system.
•
Never expose the printer to direct sunlight, water, sources of heat or install this in
damp or very dusty environments.
•
In the case of smoke, odours, or unusual noises, disconnect the product from the
mains and contact Technical Assistance.
•
To avoid the risk of injury, do not touch the parts indicated in the figure below:
Very sharp cutter
counter-blade
Very sharp automatic
cutter blade
•
Do not pull the paper from the outfeed slot when the cover of the cash register is
closed.
Very sharp manual
cutter blade
1-5