Powering On The Cash Register - Olivetti Nettun@3000 User Manual

POWERING ON THE CASH REGISTER

The cash register is equipped with an ON/OFF (I/O) switch to the rear and an ON/OFF
button on the front panel:
1. Press the ON/OFF switch turning this to the (I) position.
2. Press the ON/OFF button
Pressing the
sales environment is displayed and the cash register is ready to operate.
When the cash register is ON (
around 4 seconds. If there are no operations in course, power-off is activated. If,
during the power-off phase, the cash register is in an operating state in which power-
off is not permitted, a warning message is displayed to alert the user that power-off is
not permitted. In this case, the user must first of all complete the current operating
procedure and then press the ON/OFF button (for around 4 seconds) to switch off
the cash register.
After a period of inactivity, the cash register switches to standby and the display
switches off (the time can be set by the user using a SET command); simply tap the
touch screen to return to the register to operating mode.
WARNING: position the external power unit in a well-ventilated area at a
distance from sources of heat.
1-4
for approx. 4 seconds.
button, the cash register switches on and, after a short time, the
button lit), it can be powered off by pressing this
ON/OFF switch
ON switch