Keypad Use Config - Olivetti Nettun@3000 User Manual

KEYPAD USE CONFIG

In this environment, it is possible to program the keypad and keys displayed on the
touch screen. According to whether the Generic or PLU/Dept keypad has been
selected in the "Keypad use mode" environment, pressing the [F] > GENERAL
FUNCTIONS environment, on pressing [Config] > [User Interface Configuration]
keys, Dept/PLU Config. or Keypad int. Config, two different conditions may occur.
If PLU/dept. mode has been selected, the sales keypad has the PLU/Dept keys of
standard size (for further information consult the programming chapter at the
paragraph "Retail environment – PLU/Departments"):
F
03.03.2012 18.10 Till No.: 1
Vch: ON Pr.list 1 Operator: Disabled
If Generic mode has been selected, the keypad of the sales screen page may have
keys created by the user according to specific requirements (size of the keys,
position on the display, type of association: Department, PLU-article, functions,
payments). For further information, consult the programming chapter at the
paragraph ""Retail environment Generic Mode"".
2-17