Olivetti Nettun@3000 User Manual page 64

FUNCTION
Enable Discount
Enable Goods Refund **
Enable Single item
Enable Bypass saved
price
Offer references
NO in stock
**
This function cannot be programmed on this cash register.
Operating Procedure
1.
[department number 1-250]
2.
[ALPHANUM CHARS]
3.
[NUMERIC CHARACTERS]
4.
[NUMERIC CHARACTERS]
5.
[NUMERIC CHARACTERS]
6.
[NUMERIC CHARACTERS]
7.
[NUMERIC CHARACTERS]
8.
[NUMERIC CHARACTERS]
9.
[NUMERIC CHARACTERS]
10.
[NUMERIC CHARACTERS] .X.
11.
[NUMERIC CHARACTERS]
[NUMERIC CHARACTERS]
• It is not recommended to program the sales reference for both departments and PLUs.
4-6
RESULT
If enabled, discount operations can be performed for the department
If enabled, goods refund operations can be performed for the
department
If enabled, the sales ticket can be closed by pressing a department
key (if it is the first operation for the ticket).
If enabled, the price saved for the department can be overridden by
one entered using the keypad.
A sales offer can be applied to the department during a sales
operation.
In stock
.4. .0. .1. .X.
Enter Department programming.
.X.
Select the department.
Or
Enter the programming procedure
.X.
Dept 1
Customise descriptor
.X.
Set price for Price List 1.
.X.
Set price for Price List 2.
.X.
Set price for Price List 3.
.X.
Set price for Price List 4.
.X.
Set eco-contribution amount (if programmed for
.X.
option SET102).
Set maximum (HALO) price.
.X.
Set minimum (LALO) price.
.X.
Setting VAT rate reference.
Define the number of the merchandise group to
.X.
which to associate the department.
To disable - enable returns.
.0. - .1.
To disable - enable discounts.
.0. - .1.
To disable - enable goods refunds.
.0. - .1.
To disable - enable single item sales.
.0. - .1.
To disable - enable sales with price bypass.
.0. - .1.
Offer reference (from 1 to 5) (if programmed for
.X.
option SET102).
Press this key to interrupt programming the
selected parameter - that nevertheless remains
.TOTAL
programmed – and switch the register to the
start of configuration mode.
Press this key to interrupt programming the
selected parameter - that nevertheless remains
.SUBTOTAL
programmed - and switch the register to the
same parameter of the next department.