Selecting The Language - Olivetti Nettun@3000 User Manual

SELECTING THE LANGUAGE

To select the language for the interface, proceed as follows:
1. Select [F] > GENERAL FUNCTIONS environment, by pressing [Config] > [Set
setup].
The following screen appears:
2. Using the numeric keypad, enter the code
WARNING: if you need to change the language after having already used the
cash register, it may be necessary to print the reports (Z10). If this is the case,
consult the manual for how to print a report.
3. The cash register asks you to confirm that you want to change the language.
4. Press
.X. to confirm.
5. The current language (for example, 0=english) appears on the screen.
6. Select the language you want to set from :
0=English
1=Italian
2=French
3=German
4=Spanish .
7. After you have selected the language, the cash register prints an information
ticket and automatically restarts.
After restarting, the cash register displays the interface in the new language
selected, loading the default parameters and zeroing the management data.
2-10
F
03.03.2012 18.10 Till No.: 1
Vch: ON Pr.list 1 Operator: Disabled
.1. .6. .0. followed by .X. .