Connecting An External Printer (Optional); Connecting A Barcode Reader (Optional) - Olivetti Nettun@3000 User Manual

CONNECTING AN EXTERNAL PRINTER (OPTIONAL)

If you want to use an external printer purchased separately (such as an "Olivetti PR4
SL" or "Olivetti PRT100 Marker" model), ensure that the printer connector is of serial
type. According to your model, connect the printer to the serial connector A.

CONNECTING A BARCODE READER (OPTIONAL)

If you want use a barcode reader purchased separately, check the type of connector
it uses (USB or serial). The Barcode readers supported can handle the following
codes: UPC A / UPC-E, EAN 13 / EAN 8, Code 39 (length 5-32). According to your
model, connect to connector B or C.
1-14