Multi Format Lcd Monitor - JVC DT-V9L3D Instructions Manual

Specifications
7 General
Model name DT-V9L3D
Type

Multi format LCD monitor

Screen size Type 9 wide format
Aspect ratio 15:9
LCD panel 9˝ wide, IPS-Pro
Width: 195 mm
Effective screen size
Height: 117 mm
Number of pixels displayed 800 x 480
Number of colors displayed 16.77 million
Viewing angle (TYP.) 170° (Horizontally), 170° (Vertically)
2
Brightness 350 cd/m
Contrast ratio (TYP.) 400:1
Compliant video signal format ☞ "Available signals" on page 9
HD SDI: BTA S-004B, SMPTE292M
SD SDI: ITU-R BT.656: 525/625
Format
SMPTE259M: 525
EMBEDDED AUDIO: SMPTE299M, SMPTE272M
Audio output Internal speaker: 1.0 W
Operating temperature: 0°C – 40°C
Operating conditions Operating humidity: 20 % – 80 % (non-condensing)
* Slightly variable depending on ambient conditions for installation.
AC 220 – 240 V, 50 Hz/60 Hz
Power requirements
DC 12 – 17 V
0.25 A (AC 220 – 240 V)
Rated current
1.7 A (DC 12 – 17 V)
Width: 222.4 mm
Height: 218 mm (at the higher position), 181 mm (at the lower position),
External dimensions
176 mm (without stand)
(excluding protruding parts)
Depth: 185 mm (at the higher position), 202 mm (at the lower position),
116 mm (without stand)
3.6 kg (with the stand)
Weight
2.7 kg (without the stand)
AC power cord x 2, Power cord holder x 1, Screw x 2 (for power cord holder),
Accessories
Protective filter x 1, Screw (for protective filter) x 4
Use the Anton Bauer Dionic 90 (mount: QR DXC-M3A) external battery.
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
Notice on transportation
This monitor is precision equipment and needs dedicated packing material for transportation.
Never use any packing material supplied from sources other than JVC or JVC-authorized dealers.
7 Input/output terminals
VBS/Y
Composite signal/analog component (Y) signal input/output:
VIDEO/COMPONENT
(IN/OUT)
P , P
B R
Analog component (P
E. AUDIO HD/SD SDI (IN 1)
Digital signal input (compatible with EMBEDDED AUDIO signals):
E. AUDIO HD/SD SDI (IN 2)
E. AUDIO HD/SD SDI Digital signal output (compatible with EMBEDDED AUDIO signals):
(SWITCHED OUT)
AUDIO (IN) Analog audio signal input:
AUDIO (MONITOR OUT) Analog audio signal output:
EARPHONE Monaural mini jack (3.5 mm in diameter) x 1
REMOTE (MAKE/
☞ "Using the MAKE/TRIGGER system" on page 16
TRIGGER)
☞ "Using the RS-232C system" on page 17
REMOTE (RS-232C)
• For easy understanding, pictures and illustrations are shown by being emphasized, omitted or composed,
and may be slightly different from actual products.
• Design and specifications are subject to change without notice.
• All company names and product names mentioned herein are used for identification purposes only, and
may be the trademarks or registered trademarks of their respective companies.
1 line, BNC connector x 2
1 V(p-p), 75 Ω
* The input (IN) and output (OUT) terminals are bridge-
connected (auto termination)
, P ) signal input:
B R
1 line, BNC connector x 2
0.7 V(p-p), 75 Ω
auto detection, 1 line, BNC connector x 1
1 line switched out, BNC connector x 1
1 line, RCA connector x 1,
500 mV (rms), high impedance
1 line, RCA connector x 2,
500 mV (rms)
ENGLISH
21