Starting Ring Gear Assembly On Magneto Flywheel; Idler Gear With Torque Limiter Assembly - PIAGGIO 500 cc Service Manual

Starting ring gear assembly on magneto flywheel

- Oil the inner brass and the starting ring gear hub
surface
- Fit the starting ring gear on the flywheel and turn it
clockwise at the same time.

Idler gear with torque limiter assembly

- Grease the gear housing on the engine crankcase.
- Fit the idler gear with the torque limiter.
Flywheel and starting system
05_149
6
05_138
05_150
05_141
6 - 9