PIAGGIO 500 cc Service Manual page 45

Flywheel cover
- Oil pressure sensor supply duct
- Oil vapors decantation chamber exhaust.
- Refit the blowby reed valve with a new seal gasket.
- Refit the support with gate and tighten the screws to
the prescribed torque.
Tightening torque:
Support screws: 0.3 - 0.4 N·m
- Fit a new pump shaft O ring by means of the specific
tool.
- Fit the oil minimum pressure sensor and tighten it to
the presrcibed torque.
Tightening torque:
Oil minimum pressure sensor: 4 - 5 N·m
Specific tools:
Handle
15 mm guide
5 - 12
020376Y
020412Y
05_117
05_118
05_093
05_119