Fuel injection
YES
Install the connection harness between the control
unit and the fuel injection system. Tool 020481Y.
See page 9-8
Do not carry out connection with the control unit.
Disconnect the connection between the phase-
revolutions sensor and the fuel injection system.
Measure the resistance of the sensor
connecting the multimeter between
+ k
k -
the terminals marked
and
.
Phase-revolution sensor resistance =680 Ω±15%
YES
NO
Check the earthing isolation between one pole and
Replace the revolutions
the shielding.
sensor.
k
+ k
-
= infinity (>1MΩ)
S
NO
YES
9 - 66