PIAGGIO 500 cc Service Manual page 54

Flywheel and starting system
- Screw the flywheel lock tool bush on the threading
intended for the extractor.
- Fully insert the specific tool as shown in the figure
making sure that the pins perfectly fit in the holes
previously aligned, and that it is almost in contact with
the flywheel
Specific tool:
Flywheel lock tool
- Unloose the magneto flywheel fixing nut.
- Remove the specific tool and the fixing nut.
- Remove the washer.
6 - 4
020472Y
05_131
05_132
05_133
05_134