Storing your own sound adjustments
You can adjust the sound modes (BEAT, SOFT, POP: see page 14) to your preference and
store your own adjustments in memory.
1
SOUND
5 seconds
2
SEL
LOUD
5 seconds
3
5 seconds
4
5
Repeat the same procedure to store other settings.
To reset to the factory settings
Repeat the same procedure and reassign the preset values listed in the table on page 14.
16
3
1,4
2
Call up the sound mode you want to adjust.
See page 14 for details.
Within
Select "BAS (bass)," "TRE (treble)" or "LOUD
(loudness: for KD-SX939)."
To select and change the loudness setting for KD-SX930,
press LOUD (see page 14), and go to step 4.
Within
Adjust the selected item.
See page 15 for details.
Within
Press and hold SOUND until "MEMO" appears
SOUND
and starts flashing on the display.
Your setting is stored in memory.
(ONLY FOR
2
KD-SX930)