Cd Operations; Playing A Cd - JVC KD-SX939/SX930 Instruction Manual

CD OPERATIONS

Playing a CD

1
2
• When a CD is inserted upside down, "PLEASE EJECT" appears on the display.
When you open the control panel by pressing 0, the CD automatically ejects.
TRACK
Note on One-Touch Operation:
When a CD is already in the loading slot, pressing CD turns on the unit and starts playback
automatically.
To stop play and eject the CD
Press 0.
CD play stops, the control panel opens, then the CD automatically ejects from the loading
slot.
If you change the source to AM/FM or CD changer, the CD play also stops (without ejecting
the CD this time).
• If the ejected disc is not removed for about 15 seconds, the disc is automatically inserted again into
the loading slot to protect it from dust. (CD play will not start this time.)
• You can eject the CD even when the unit is turned off.
10
1. Insert a disc into the loading slot.
The unit turns on, draws a CD and starts playback
automatically.
2. Close the control panel by hand.
Total track number
of the inserted disc
TRACK
CRUISE
Open the control panel.
Total playing time of
the inserted disc
CRUISE
1
Elapsed playing
Current track
time
TRACK
CRUISE