Changing The Level Indicator Mode; Selecting The Dimmer Mode - JVC KD-SX939/SX930 Instruction Manual

To check the current clock time (changing the display mode)
Press DISP repeatedly. Each time you press the button, the display mode changes as follows.
During tuner operation:
Frequency
• If the unit is not in use when you press DISP, the power turns on, the clock time is shown for
5 seconds, then the power turns off.

Changing the level indicator mode

When shipped from the factory, the level indicator on the display shows the audio level.
You can change it to show the audio level or volume level.
• AUDIO: Audio level indicator
• OFF: Volume level indicator
1 Press SEL for more than 2 seconds.
One of the PSM items appears on the display.
2 If "LEVEL" does not appear, press SSM ¢
3 Rotate the control dial clockwise or counterclockwise to select the level indicator mode you
want to use.

Selecting the dimmer mode

When you turn on the car head lights, the display automatically dims (Auto Dimmer).
When shipped from the factory, Auto Dimmer function has been activated.
If you want to cancel this function, follow the procedure below and select "OFF."
• AUTO: Activates Auto Dimmer
• ON: Always dims the display
• OFF: Cancels Auto Dimmer
1 Press SEL for more than 2 seconds.
One of the PSM items appears on the display.
2 If "DIMMER" does not appear, press SSM ¢
3 Rotate the control dial clockwise or counterclockwise to turn on or off Auto Dimmer.
18
Clock
During CD operation:
Elapsed
playing time
or SSM 4
until it appears.
Current setting appears.
or SSM 4
Current setting appears.
Clock
Level indicator
until it appears.