Storing Your Own Sound Adjustments - JVC KD-FX321 Instructions Manual

Storing your own sound
adjustments
You can adjust the sound modes (BEAT, SOFT,
POP: see page 9) to your preference and store
your own adjustments in memory.
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step 1 again.
1
Call up the sound mode you want to
adjust.
See page 9 for details.
2
Select "BAS" (bass), "TRE" (treble)
SEL
3
Adjust the bass or treble level.
See page 9 for details.
4
To turn on or off the super bass
function
Each time you press S.BASS, the super bass
function turns on and off alternately. See page
9 for details.
S.BASS
10
5
Repeat step 2 and 3 to adjust the other
items.
6
Press and hold SCM until the sound
mode you have selected in step 1
flashes on the display.
Your setting is stored in memory.
7
Repeat the same procedure to store
other setting.
To reset to the factory settings
Repeat the same procedure and reassign the preset
values listed in the table on page 9.