Selecting Preset Sound Modes (Ieq: I-Equalizer); Storing Your Own Sound Adjustments - JVC KD-LH1000R Instructions Manual

Selecting preset sound modes
(iEQ: i-equalizer)
You can select a preset sound mode suitable to
the music genre.
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step 1 again.
1
Press MODE (M).
"Mode" appears on the display.
2
Press EQ (equalizer) while "Mode" is
still on the display.
The last selected sound mode is
called up.
Ex.: If you have selected "Flat" previously
3
Select the sound mode you want.
Flat O Hard Rock O R&B*O Pop O
Jazz O Dance Music O Country O
Reggae O Classic O User 1 O User 2 O
User 3 O (back to the beginning)
* Rhythm and Blues
To cancel the sound mode, select "Flat" in step
3.
Note:
For details about the preset settings of each sound
mode, see page 27.
As you turn the control
dial, the sound modes
change as follows:
Storing your own sound
adjustments
You can adjust the sound modes to your preference
and store your own adjustments in memory
(User 1, User 2 and User 3).
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step 1 again.
1
Press MODE (M).
"Mode" appears on the display.
2
Press EQ (equalizer) while "Mode" is
still on the display.
3
Select the sound mode you want to
adjust.
Ex.: If you have selected "R & B"
4
Enter the sound adjustment mode.
The following sound mode
adjustment screen appears
on the display.
CONTINUED ON THE NEXT PAGE
25