Overlapping Multipart Forms With Labels - Epson DLQ-3500 User Manual

Overlapping multipart forms with labels

This kind of continuous paper is a combination of the two types
of forms; overlapping multipart forms and continuous forms with
labels. Be sure to follow any special instructions intended for
either type of forms.
c
Caution:
Use overlapping multipart forms with labels only under normal
operating conditions because labels are especially sensitive to
temperature and humidity.
Follow these steps to load overlapping multipart forms with
labels:
1. Make sure of the following:
Your software settings keep the printing entirely within
the printable area. See "Printable area" for more
information.
T r act or is selected as the paper source on the control
panel.
The setting of the page l engt h f or t r act or in the default
settings matches the page length of the form you use. See
"Changing default settings" for more information.
2. Turn on O ver l appi ng For m s and Ski p over per f or at i on
settings in the default-setting mode.
-30