Loading Continuous Paper - Epson DLQ-3500 User Manual

It is recommended to set the paper-thickness lever to AUT O when
printing on multipart forms, because the total thickness of multipart
forms may vary depending on the kind of paper even if the number
of parts is the same.
However, if your printout appears faint, set the paper-thickness
lever to a lower position within the range specified in the table above.
Similarly, if your printout appears smudged, set the lever to a higher
position.
Your printout appears faint or characters seem skipped or missing,
this setting may be too high. On the other hand, if the setting is too
low, your printout may appear smudged

Loading Continuous Paper

You can load continuous paper from the built-in tractor unit.
Note:
See "Continuous paper" for detailed specifications on continuous paper.
-7