Epson DLQ-3500 User Manual page 44

c
Caution:
Never use the knob to adjust the tear-off position; this may
damage the printer or cause it to lose the tear-off position.
Note:
Your tear-off position setting remains in effect until you change it, even
if you turn off the printer.
1. Press the Paus e button if the printer is printing.
2. Make sure the T ear O f f /Speci al Paper lights are flashing
(the paper is at the current tear-off position). You may need
to press the Tear O f f /Speci al Paper button to advance the
paper to the tear-off position.
3. Hold down the Paus e button for about three seconds. The
Paus e light begins flashing and the printer enters the Micro
Adjust mode.
4. Press the LF/FF D button to feed paper backward, or press
the Load/Ej ect U button to feed paper forward, until the
paper perforation is aligned with the tear-off edge of the
printer cover.
-38