Turn Off The Printer - Epson DLQ-3500 User Manual

24-pin dot matrix printer
Hide thumbs Also See for DLQ-3500:
Table of Contents

Advertisement

Note:
The range of printing position is from 1.9 mm (9/120 inch) to 25.4
mm (120/120 inch) from the left edge of the paper. The default is the
pattern No. 2, which is about 3 mm (14/120 inch).
The automatic sheet alignment unit must be installed prior to
adjusting the printing position.
To print the instruction and print-position patterns, you need two
sheets of A4 or larger size single-sheet paper.
Make sure that M anual /C SF is selected as the paper source on the
control panel. If not, select it by pressing the Paper Sour ce button.

1. Turn off the printer.

c
Caution:
Whenever you turn off the printer, wait at least five seconds
before turning it back on; otherwise you may damage the
printer.
2. While holding down the Pi t ch button, turn on the printer.
* While holding down the Pi t ch button, turn on the printer.
-19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents