Epson DLQ-3500 User Manual page 29

c
Caution:
Use overlapping multipart forms only under normal operating
conditions.
1. Make sure of the following:
Your software settings keep the printing entirely within
the printable area. See "Printable area" for more
information.
T r act or is selected as the paper source on the control
panel.
The setting of the page l engt h f or t r act or in the default
settings matches the page length of the form you use. See
"Changing default settings" for more information.
2. Turn on O ver l appi ng For m s and Ski p over per f or at i on
settings in the default-setting mode.
Note:
When O ver l appi ng For m s is turned on in the default-setting
mode, the printer automatically activates the auto paper thickness
function even though the paper-thickness lever may be set to another
position.
c
Caution:
Printing on the edge of overlapping multipart forms can
damage the print head.
Be sure to turn on O ver l appi ng For m s and Ski p over
per f or at i on settings in the default-setting mode when
using this type of paper; otherwise your printer may be
damaged.
3. Follow the instructions in "Loading continuous paper with
the tractor".
-23