Epson DLQ-3500 User Manual page 89

The top margin or
top-of-form position setting
is incorrect.
The printer driver settings
you want to use are not
selected in your software.
You moved the paper using
the knob while the printer
was on.
Wrong tear-off position
The printer prints on (or too far away from) the perforation of
your continuous paper.
Cause
Check and adjust the margin or
top-of-form position settings in your
application software. See "Printable
area" for more information.
You can also adjust the top-of-form
position using the Micro Adjust
function. However, settings made in
Windows applications override
settings made in the Micro Adjust
mode. See " Adjusting the top-of-form
position".
Choose the correct printer driver
setting from the Windows desktop or
in your application before printing.
Adjust the top-of-form position using
the Micro Adjust function. See
"Adjusting the top-of-form position".
c
Caution:
Never use the knob to adjust
the top-of-form position; this
may damage the printer or
cause it to lose the
top-of-form position.
What to do
-13