Adding or replacing a hard drive
Use these instructions to add or replace hard drives.
To add or replace a hard drive:
1
Identify your computer case style. For more information, see
your computer case style" on page
2
Open the case by following the instructions in
page
221.
3
If you are replacing a drive, disconnect the drive cables, noting their
locations and orientation. (You will reconnect the cables after you install
the new drive.) See the drive documentation for further instructions.
Upgrading the Gateway Tower and Mid Tower Cases
220.
Data ribbon
cable
www.gateway.com
"Identifying
"Opening the case" on
Power cable
229