Replacing the system battery
If the computer clock does not keep time or the settings in the BIOS Setup utility
are not saved when you turn off your computer, replace the system battery.
Use a battery of the same size and voltage as the original battery that was in
your computer.
Warning
To replace the battery:
1
Open the BIOS Setup utility using the instructions in
Utility" on page
2
Write down all the values in the menus and submenus, then exit from the
utility.
3
Shut down your computer.
4
Identify your computer case style. For more information, see
your computer case style" on page
5
Open the case by following the instructions for your case style.
6
Locate the old battery on the system board and note its orientation. You
will need to install the new battery the same way.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer. Dispose of used
batteries following the manufacturer's instructions.
289.
www.gateway.com
Replacing the system battery
"Using the BIOS Setup
220.
"Identifying
287