Cli Reference - THOMSON SHDSL Manual

4| Configuring and Operating the SHDSL Interface
4.3

CLI Reference

Overview
This section describes following SHDSL-related CLI commands:
":xdsl add" on page
":xdsl delete" on page
":xdsl ifadd" on page
":xdsl ifattach" on page
":xdsl ifconfig" on page
":xdsl ifdelete" on page
":xdsl ifdetach" on page
":xdsl iflist" on page
":xdsl list" on page
":xdsl profile add" on page
":xdsl profile delete" on page
":xdsl profile list" on page
":xdsl profile modify" on page
:xdsl add
To assign a DSL link to a DSL interface, execute the command
Following two parameters must be specified:
name: the name of the DSL interface, which must be readily available and in detached state.
wirepair: the name of a DSL link that is available.
For example, add the DSL links with link ID 0 and link ID 3 to a DSL interface:
=>:xdsl add name=dsl0 wirepair=link0
=>:xdsl add name=dsl0 wirepair=link3
The maximum number of DSL links is limited. For more information, see
limits" on page
:xdsl delete
To remove a DSL link from a DSL interface, execute the command
Following two parameters must be specified:
name: the name of the DSL interface, which must be in detached state.
wirepair: the name of the DSL link.
For example, remove the DSL link with link ID 0 from a DSL interface:
=>:xdsl delete name=dsl0 wirepair=link0
E-DOC-CTC-20080313-0001 v2.0
27
27
28
28
28
29
29
29
31
32
32
32
33
13.
:xdsl add
.
" Product capabilities and
:xdsl delete
.
27