System Settings - D-Link DWR-112 User Manual

Section 3 - Configuration
Save Settings
Use this option to save the current router
to Local Hard
configuration settings to a file on the hard disk
Drive:
of the computer you are using. First, click the
Save button. You will then see a file dialog,
where you can select a location and file name
for the settings.
Load Settings
Use this option to load previously saved
from Local
router configuration settings. First, use the
Hard Drive:
Browse control to find a previously save file
of configuration settings. Then, click the Load
button to transfer those settings to the router.
Restore to
Click the Restore button to restore all
Factory Default
configuration settings back to the settings that
Settings:
were in effect at the time the router was shipped
from the factory. Any settings that have not been
saved will be lost, including any rules that you
have created. If you want to save the current
router configuration settings, use the Save
button above.
Reboot the
Click to reboot the router.
Device:
Clear Language
Click the Clear button to restore the device back
Pack:
to the English interface version and remove
other languages installed for the system web
pages.
D-Link DWR-112 User Manual

System Settings

76