Connecting Through A 3G Adapter (3G Mode) - D-Link DWR-112 User Manual

Section 2 - Installation

Connecting Through a 3G Adapter (3G Mode)

If you are using a 3G USB adapter to connect to the Internet, please follow these steps:
1. Move the switch on the side of the DWM-112 to the 3G position.
2. Insert your 3G USB adapter into the USB port on the top of the DWR-112.
3. Use an Ethernet cable to connect your computer to Port 2 on the DWM-112.
4. Connect the power adapter to the DWM-112, and plug the power adapter into a power outlet. Wait about one minute
for the router to boot.
5. Check to make sure that the LEDs for Power and Port 2 are lit. If they are not lit, check your connections and make
sure your computer and the DWM-112 are all turned on.
6. Open a web browser and go to 192.168.0.1. Enter admin as the user name, leave the password blank, then click
the Login button to open the configuration interface.
7. For more information on configuring the DWM-112 in 3G Mode, please refer to "Internet Connection Setup Wizard
(3G Mode)" on page
D-Link DWR-112 User Manual
15.
12