Manual Configuration (Wi-Fi Mode) - D-Link DWR-112 User Manual

Section 3 - Configuration
If you opt to set up your Internet connection manually, you will be redirected to a WAN (Wi-Fi) setup page that allows
you to select your Internet type and enter the correct configuration parameters.
Internet
Select your Internet connection type using
Connection
the "My Internet Connection is:" drop-down
Type:
menu. Configure the parameters for your WAN
connection in the section below the Internet
Connection Type section as described in the
following pages.
Enable WAN
Checking this box will allow the router to use a
Failover:
connected 3G USB adapter to get an Internet
connection in the event that your primary
Internet connection(connected to Port 1) fails.
3G Internet
If you want to enable the WAN Failover feature,
Connection:
configure the parameters for your 3G Internet
Connection here.
Click the Save Settings button when you have
finished configuring the WAN connection.
D-Link DWR-112 User Manual

Manual Configuration (Wi-Fi Mode)

26