Russia Pppoe (Dual Access) - D-Link DWR-112 User Manual

Section 3 - Configuration
Choose Russia PPPoE (Dual Access) from the My Internet Connection is drop-down menu if your ISP is based in
Russia and uses a PPPoE connection. The PPPOE setup screen will appear in the middle of the same page. Your
ISP will provide you with a username and password. This option is typically used for Russian DSL services.
Address Select Static if your ISP assigned you the IP
Mode: address, subnet mask, gateway, and DNS
server addresses. In most cases, select
Dynamic.
IP Address: Enter the IP address (Static PPPoE only).
User Name: Enter your PPPoE user name. Check the MPPE
box to enable the MPPE encryption protocol
between the DWR-112 and PPPoE server.
Password: Enter your PPPoE password and then retype
the password in the next box.
Service Name: Enter the ISP Service Name (optional).
Reconnect Select either Always-on, On-Demand, or
Mode: Manual.
Maximum Idle Enter a maximum idle period during which an
Time: inactive Internet connection will be maintained
before being dropped. To disable this feature,
enable Auto-reconnect.
D-Link DWR-112 User Manual
Manual Configuration (Wi-Fi Mode)

Russia PPPoE (Dual Access)

37