Bridge Mode - D-Link EXO DIR-X6060 User Manual

Section 3 - Configuration
Once your DIR-X6060 has rebooted and is operating under bridge mode, in the Settings menu on the bar at the top of the
page, click Bridge to access this page. This page allows you to configure the wireless settings for your DIR-X6060 while it
operates in bridge mode and to choose which wireless network to extend.
Click Save at any time to save the changes you have made on this page.
Wi-Fi Name (SSID)
Type in the Wi-Fi name of the network you would like to
extend.
Password Type in the password of the network you would like to extend.
Scan If Scan is pressed, a window will pop up showing you available
Wi-Fi networks. You can choose the network you would like to
extend. After selecting the network option, press Select and
you will be prompted to enter a password if required. Press
OK to confirm your selection.
D-Link DIR-X6060 User Manual

Bridge Mode

Existing Network
69