Led States; Caring For Your Device - Novatel MiFi 2200 User Manual

LED States

The MiFi LEDs provide valuable information about the state of the device and connection.
Service Status LED
No Light
Green Solid
Slow Blinking
Intermittent Blinking
Power Button LED
No Light —
Green Solid
Glowing
Red Blinking
Amber Solid
Blinking
Blue Solid

Caring for Your Device

As with any electronic device, the MiFi 2200 must be handled with care to ensure reliable operation.
Novatel Wireless recommends the following handling guidelines:
Do not apply adhesive labels to the MiFi 2200; they may cause the device to potentially
•
overheat and they may alter the performance of the antenna system.
The USB connector should plug easily into your computer's Type A USB port. Forcing the
•
device into a port may damage the connector.
Protect the MiFi 2200 from liquids, dust, and excessive heat.
•
Store the MiFi 2200 in a safe place, when not in use.
•
— Device is powered off.
MiFi is powered on and connected to a mobile
broadband network, but is not transmitting or receiving
data.
MiFi is powered on but there is no service.
MiFi is transmitting / receiving mobile broadband data.
The blinking rate is proportional to the data speed.
Device is powered off.
MiFi is powered on and fully charged.
MiFi is in standby mode (power saving). Press the power button
to wake up the device.
Battery is critically low.
Battery is charging.
Error. [See Troubleshooting
MiFi is powered on and roaming.
]
(page 41).
8