Led States; Caring For Your Device - Novatel MIFI 2200 User Manual

LED States

The MiFi Device LEDs provide valuable information about the state of the device and connection
Service Status LED
No Light
Green
Power Button LED
No Light
Green
Red
Amber

Caring for Your Device

As with any electronic device, the MiFi 2200 Device must be handled with care to ensure reliable
operation. Novatel Wireless recommends the following handling guidelines:
Do not apply adhesive labels to the MiFi 2200 Device; they may cause the device to
•
potentially overheat and they may alter the performance of the antenna system.
The USB connector cable should plug easily into your computer's Type A USB port. Forcing
•
the device into a port may damage the connector.
Protect the MiFi 2200 Device from liquids, dust, and excessive heat.
•
Store the MiFi 2200 Device in a safe place, when not in use.
•
—
Solid
Slow Blinking
Intermittent Blinking The MiFi Device is transmitting / receiving
—
Solid
Glowing
Blinking
Solid
Blinking
8
Device is powered off.
The MiFi Device is powered on and connected
to a mobile broadband network, but is not
transmitting or receiving data.
The MiFi Device is powered on but there is no
service.
mobile broadband data. The blinking rate is
proportional to the data speed.
Device is powered off.
The MiFi Device is powered on and fully
charged.
The MiFi Device is in standby mode (power
saving). Press the power button to wake up the
device.
Battery is critically low.
Battery is charging.
Error. [See Troubleshooting .]
(page 57)