Port Filtering For Standard Applications; Port Filtering For Custom Applications - Novatel MiFi 2200 User Manual

Port Filtering for Standard Applications

➊ ➊
From the Port Filtering page, select the Enable Port Filtering check box.
➋ ➊
Select the check boxes for the applications you want to allow access to the Internet.
➌ ➊
Click Apply.
NOTE
The device uses standard ports for these applications. If you have applications that do not use the
standard ports or that are not listed under Allowed Applications, use Custom Applications.

Port Filtering for Custom Applications

To set up port filtering for a custom application, you will need to know the port numbers (up to
five ports or port ranges) and the protocol (TCP, UDP, or both) the application uses for its outgoing
traffic.
➊ ➊
On the Port Filtering page, select the Enable Port Filtering check box.
➋ ➊
Click Custom Applications.
➌ ➊
Enter a name for the application and click the Ports link.
➍ ➊
Enter the port or port range. You can enter up to five ports or port ranges for each
application.
➎ ➊
For each port number or range, select the protocol (TCP, UDP, or both) used by that port or
port range.
➏ ➊
Click Hide.
➐ ➊
Click Apply.
32