Novatel MiFi 2200 User Manual page 45

I cannot connect to MiFi in Wi-Fi mode.
➊ ➊
Make sure the LEDs are on.
If the LEDs are not on, check your battery.
➋ ➊
Make sure your wireless radio / AirPort is turned on. (Check your computer help if you need
assistance.)
➌ ➊
Open your wireless network connection list.
Windows: Right-click icon and select View Available Networks.
•
Mac: Pull down list from AirPort icon.
•
➍ ➊
Select the MiFi 2200 network name (in Windows, click Connect).
When the MiFi is connected to the network, the status LED begins to blink.
My network does not appear in the wireless network list.
Verify that the MiFi LEDs are on and are not showing an error condition. [See LED Indicators
➤ ➊
(page 8).]
Refresh your network list.
➤ ➊
Windows: Click Refresh Network List on the left side of the Wireless Network Connection
•
screen. If that does not work you can try the following:
1. Open Network Connections.
2. Right-click Wireless Network Connection and select Properties.
3. Click the Wireless Networks tab.
4. Delete any unused wireless connections from the Preferred Networks list and click OK.
5. Restart your computer.
Mac: Try rebooting your computer.
•
I get a message that MobiLink 3 cannot be installed when I try to use MiFi in
USB Modem mode.
You might not have administrative privileges. Contact your system administrator or log on to
➤ ➊
your computer as an administrator and try plugging it in again.
How do I disconnect from the network?
WiFi Mode:
➤ ➊
Use your computer network manager.
•
-OR-
Login to MiFi Settings and click Disconnect.
•
1. Open your web browser and enter http://192.168.1.1 into the address window.
2. Then type your administrative password into the login window and click Login.
3. Click the Disconnect button.
44